24V 2.5Ah LITHIUM-ION BATTERY
The FLEX 24V Lithium Battery Platform brings power output to the next level.
Note: The label on your FLEX tool may look different but will contain all the required information.
1. Model Number (on side of tool)
2. Serial Number (on bottom of tool)
1. Model Number
2. Serial Number
How to find your model number
Get parts for select FLEX tools here.
The FLEX 24V Lithium Battery Platform brings power output to the next level.
The FLEX 24V Lithium Battery Platform brings power output to the next level.
The FLEX 24V Lithium Battery Platform brings power output to the next level.
The FLEX 24V Lithium Battery Platform brings power output to the next level.
Watt for watt, FLEX 24V chargers are up to 50% faster than the competition.
Watt for watt, FLEX 24V chargers are up to 50% faster than the competition.
Conquer demanding drilling applications with power, performance, and versatility. This compact FLEX 24V ½" 2-Speed Drill Driver packs 750 in-lbs. of torque with exceptional runtime, so you can power through to what's next.
The FLEX 24V Brushless 7/8" SDS Plus Rotary Hammer packs maximum power and efficiency into a compact and lightweight tool—perfect for grueling applications like overhead drilling. This rotary hammer delivers 1.3 ft-lbs of impact energy and constant speed.
The FLEX 24V Brushless 1" SDS Plus Rotary Hammer is built for performance. Drill confidently with constant speed control, built-in LED lighting and vibration suppression.
Hang sheet after sheet with ease with the FLEX 24V Brushless Drywall Screw Gun with Magazine. This lightweight screw gun arms you with ultimate in speed and efficiency.
Rip through miles of 2x4s with the FLEX 24V Brushless 7-1/4" Circular Saw. This lightweight and durable beast is built for advanced cutting performance and ultimate cutting capacity (up to 3x lumber in one pass).
The FLEX 24V Brushless 5" Variable Speed Angle Grinder with Side Switch delivers next-level advantages to the jobsite. Unleash up to 10,000 RPM of unmatched power but also work with confidence.
The FLEX 24V Brushless Oscillating Multi-Tool channels up to 20,000 OPM, to cut, trim, plunge, sand, grind, and scrape with confidence. Maintain control with advanced vibration suppression.
The FLEX 24V Flood Light delivers ultimate visibility with essential jobsite durability. Control up to 2,000 Lumens where you need light most with 360˚ adjustability and adaptable mounts.
The FLEX 1.6 Gallon Wet/Dry Vacuum dominates spills, dust, and debris with powerful suction. Optimize your runtime and performance to meet job demands with enhanced Eco and Boost modes.
The FLEX Jobsite Radio is built to deliver excellent sound quality both indoors and out. Blast music or AM/FM radio with powerful dual speakers and bass boost to keep your sound loud and clear.
The FLEX Mud Mixer delivers the power, comfort, and control to prep any material for the job. The ergonomic dual-handle design enhances your stability and control.
Cut with ultimate precision and control with the FLEX 24V Brushless Barrel Grip Jigsaw. This versatile jigsaw features four adaptable speeds and auto mode.
The FLEX 24V Brushless ½" 2-Speed Drill Driver with Turbo Mode dominates drilling applications with industry-leading torque (1,400 in-lbs). Durable tool construction further ensures you're equipped for the long haul.
Conquer demanding drilling applications with power, performance, and versatility. This compact FLEX 24V Brushless ½" 2-Speed Hammer Drill packs 750 in-lbs. of torque and extra impact for powering through masonry.
The FLEX 24V Brushless ½" 2-Speed Hammer Drill with Turbo Mode delivers industry-leading torque (1,400 in-lbs). Named Best Cordless Drill by Pro Tool Reviews.
Dominate THE toughest fastening applications with the unrivaled power and control of FLEX 24V Brushless 1/4" Hex Impact Driver. This impact delivers 1,800 in-lbs. of unrelenting torque, so you can power through lag bolt after lag bolt.
The FLEX 24V Brushless 1/4" Quick Eject Hex Impact Driver with Multi-Mode delivers unrivaled power for the toughest fastening applications. Take control with three speed modes that lets you adapt to the application at hand.
When jobs demand nut-busting power, the FLEX 24V Brushless High Torque Impact Wrench delivers 1150 ft-lbs. of unrelenting torque. Take control with three adaptable speed modes and do it comfortably with vibration suppression.
First of its kind, this in-line saw design provides total balance and improved visibility with a clear view on both sides of every cut. The FLEX 24V Brushless 6-½" In-Line Circular Saw rips through 3X in one pass.
Cut with ultimate precision and control with the FLEX 24V Brushless D-handle Jigsaw. This versatile jigsaw features four adaptable speeds and auto mode.
No demo is too tough for the FLEX 24V Brushless Reciprocating Saw. This saw features fast, orbital cutting action and delivers more cuts per charge.
The FLEX 24V Brushless Drywall Cut Out Tool powers through the entire day with it's exceptional runtime, up to 150 outlet boxes per charge. Adjustable airflow directs the dust away from the work in the direction desired.
The FLEX 24V Brushless 5" Variable Speed Angle Grinder with Paddle Switch delivers next-level advantages to the jobsite. Unleash up to 10,000 RPM of unmatched power but also work with confidence.
The FLEX 24V Brushless 5" Variable Speed Angle Grinder with Paddle Switch delivers next-level advantages to the jobsite. Unleash up to 10,000 RPM of unmatched power but also work with confidence.
Put torque to work with the FLEX 24V 1/2" 2-Speed Drill Driver and 1/4" Hex Impact Driver combo. These jobsite essentials pack intense power into compact and durable designs to tackle even the toughest applications.
Bring your best to drilling and fastening applications with the combined power and control of FLEX 24V 1/2" 2-Speed Hammer Drill Driver and 1/4" Quick Eject Hex Impact Driver.
Dominate drywall from start to finish with the combined power and efficiency of the FLEX Drywall Screw Gun and FLEX Drywall Cut Out Tool.
Demanding drilling and fastening applications are no match for the combined power and control of FLEX 24V 1/2" 2-Speed Drill Driver with Turbo Mode and 1/4" Hex Impact Driver with Quick Eject combo kit.
Elevate your game to the next level with this comprehensive, four-tool FLEX combo kit. Each maximizes power and efficiency with 24V cross-compatibility and powerful, sensor-free brushless motors.
This cutting focused four-tool kit brings together the powerful FLEX 7-1/4" Circular Saw Bare Tool, 1/2" 2-Speed Drill Driver, 1-1/4" Reciprocating Saw, and the Fixed Speed Angle Grinder with Side Switch.
Stacked, loaded and ready to go. This six piece combo kit combines the powerful cutting capabilities of the FLEX 7-1/4" Circular Saw and Reciprocating Saw with the torqued-out 1/2" 2-Speed Hammer Drill and 1/4" Hex Impact Driver.
Maximize your grinder with the adaptable FLEX Dust Shroud for FLEX 24V Angle Grinders. The one step guard adjustment allows for optimal dust collect is any position.
Enhance your FLEX 24V Drywall Screw Gun with the adaptable FLEX Collated Magazine. This attachment improves productivity with automated screw feed.
The FLEX Giraffe® makes use of intelligent materials and weight optimized design. At 8.9 pounds, it is almost 1 pound lighter than its predecessors enabling better handling and effortless handling on high ceilings and walls.
Giraffe wall and ceiling sander
The L 10-11 125 9 Amp 4-1/2" / 5" Small Angle Grinder with Restart Protection and Side Switch comes with our long-life motor technology which improves the service life of the brushes.
The L 14-11 125 12 Amp 4-1/2" / 5" Small Angle Grinder with Restart Protection Side Switch comes with our long-life motor technology which improves the service life of the brushes.
The L 15-10 150 is designed for the professionals needs. Its safety features include a soft start system, reload protection and restart protection.
The L21-8 180 15 Amp 7" Large Angle Grinder with Trigger Lock-On Switch features our long-life motor technology which improves the service life of the brushes.
The L26-6-240 15 Amp 9" Large Angle Grinder with Trigger Lock-On Switch is designed to handle the most tough applications.
The compact grinder from FLEX features a highly efficient and resilient motor formore power output along with extensive dust protection to extend its useful life.
The L7-12 115 6 Amp 4-1/2 Small Angle features a Long-Life Motor with highly improved carbon brushes that runs up to 42% cooler than our competitors.
The LE 14-11 125 12 Amp 4-1/2" / 5" Variable speed Small Angle Grinder with Restart Protection Side Switch comes with our long-life motor technology which improves the service life of the brushes.
Featuring the FLEX BW-18 Cordless Blower, designed to make the drying of your vessel easier than ever, the FLEX BW-18 Cordless Blower Complete Set also includes a 5.0 amp battery pack, a charger, extra nozzle accessories, and a storage/carrying case!
The high-performance turbine ensures high suction capacity and capable of wet applications.
The high-performance turbine ensures high suction capacity and capable of wet applications.
The FLEX CL 2000 LED floodlight is designed to illuminate your workspaces with a high-quality LED that provide 2000 Lm.
The FLEX DWL 2500 12/18 LED light is designed to bring the swirl-finding potential of the sun right to your garage.
The FLEX L 12-3 100 WET is single speed 3700 RPM designed for wet processing of granite, marble and other high-quality types of rock.
The FLEX L 12-3 100 WET is single speed 0-3700 RPM designed for wet processing of granite, marble and other high-quality types of rock.
The FLEX LW 1503 is single speed polisher 3700 RPM designed for wet processing of granite, marble and other high-quality types of rock.
The FLEX PE 14-2 150 POLISHFLEX was developed by professionals for professionals.
The FLEX PE14-3-125 Rotary Polisher is built for speed and effortless operation.
The FLEX PE 150 18.0-EC 5 inch Cordless Rotary Polisher is a circular polisher that quickly removes swirls and scratches, and even heavier oxidation, from your vehicle’s clearcoat.
The FLEX PE8 Rotary Polisher is a purpose-built polisher designed specifically for small, intricate body panels.
The FLEX PXE 80 polisher is the all-rounder for small areas from spot sanding to hologram-free finishing.
The FLEX XC 3401 VRG Polisher simulates the circular movement of the human hand while polishing.
The FLEX XCE 10-8 is capable of anything from finishing to hologram-free defect correction.
The FLEX XCE 8 125 cordless dual action polisher can be used in the semi-professional area as a base polisher for hologram-free removal of various types of paint damage.
The FLEX XFE15 150 Cordless Orbital Polisher is an orbital polisher with a 15 mm throw that will remove swirls, scratches, and more from your paint.
The FLEX XFE 7-12 3" Mini Polisher is free spinning, 12mm random orbital polisher designed to remove swirls, scratches, and other paint imperfections for every surface on your car.
The FLEX XFE7-15 150 Corded Orbital Polisher is an orbital polisher with a 15 mm throw that will remove swirls, scratches, and more from your paint.
The FLEX CS40 Wet Stone Saw is designed for use in the stone, tile and glass industry. This machine is able to provide perfectly straight cuts which are required for quality fabrication and installation.
The FLEX MS1706FR wall chaser features a unique rotating motor system that allows the machine to be used for pull cutting vertical slots, and push cutting horizontal slots.
The FLEX 12V/2.5 Ah lithium-ion battery uses Therma-Tech™ heat management technology to keep the battery cool while working.
The FLEX 12V/4.0 Ah lithium-ion battery uses Therma-Tech™ heat management technology to keep the battery cool while working.
The FLEX 12V/6.0 Ah lithium-ion battery uses Therma-Tech™ heat management technology to keep the battery cool while working.
The FLEX 18V/2.5 Ah lithium-ion battery uses Therma-Tech™ heat management technology to keep the battery cool while working.
The FLEX 18V/5.0 Ah lithium-ion battery uses Therma-Tech™ heat management technology to keep the battery cool while working.
The FLEX 12V/18V Battery Charger is a “smart" charger that optimizes charging based on the battery voltage and capacity, charging to 80% capacity in as little as 30 minutes.
Light up your work area with the FLEX LED Work Light for ultimate jobsite visibility. This ultra-bright LED work light packs up to 300 lumens into a compact design to illuminate tight spaces.
The FLEX 24V Brushless 5" Fixed Speed Angle Grinder with Side Switch delivers next-level advantages to the jobsite. Unleash up to 10,000 RPM of unmatched power but also work with confidence.
The FLEX 24V Stacked Lithium Battery Platform offers industry-dominating power and performance. Protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at registermyFLEX.com through December 31, 2024.
The FLEX 24V Stacked Lithium Battery Platform offers industry-dominating power and performance. Protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at registermyFLEX.com through December 31, 2024.
The FLEX 24V Stacked Lithium Battery Platform offers industry-dominating power and performance. Protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at registermyFLEX.com through December 31, 2024.
The FLEX 24V 550W Super Charger is lightning fast, because there's no time for downtime. It charges up to 100% faster than the competition, fully charging a 3.5Ah Stacked Lithium battery in as little as 15 minutes.
Rip through miles of 2x4s with the FLEX 24V Brushless 7-1/4" Rear Handle Circular Saw. Both lightweight and durable, this precision cutting tool is a control freak, positioning the blade to the left of the motor and placing the handle at the rear to optimize line of sight. Includes saw, 24V battery, and charger.
Rip through miles of 2x4s with the FLEX 24V Brushless 7-1/4" Rear Handle Circular Saw. Both lightweight and durable, this precision cutting tool is a control freak, positioning the blade to the left of the motor and placing the handle at the rear to optimize line of sight. Includes saw, 24V battery, and charger.
With the FLEX 24V One-handed Reciprocating Saw, one hand is all you need to cut to the quick on lumber, copper pipe, or whatever else the job throws at you. Includes saw, 24V battery, and charger.
With the FLEX 24V One-handed Reciprocating Saw, one hand is all you need to cut to the quick on lumber, copper pipe, or whatever else the job throws at you. Includes saw, two 24V batteries, and charger.
The FLEX 24V Modular Dual Power LED Light takes lighting the jobsite to a whole new level. Control up to 4,000 Lumens where you need light most with 360˚ adjustability and a 3 panel light head.
Dirt and dust have nowhere to hide with the FLEX Jobsite Blower. Built for moderate duty at an unbeatable price, it delivers very focused airflow so you can stay clean and in control.
The 24V Jobsite Fan provides up to 46 hours of portable air flow on a single charge. Dust and fumes don’t stand a chance against the force of 1100 CFM.
Satisfy your need for speed with the power and control of the FLEX SENSOR-FREE Brushless MOTOR 1/2" 2-Speed Hammer Drill With Turbo Mode. Includes drill, one 24V battery, and charger.
Conquer fastening applications easily with the power and control of the 1/4" Quick Eject Hex Impact Driver, which delivers 2,500 in-lbs. of torque at 4,000 RPM for peak performance.
When jobs demand nut-busting power, the FLEX 24V Brushless High Torque Impact Wrench delivers 1150 ft-lbs. of unrelenting torque. Includes wrench, one 24V battery, and charger.
Rip through miles of 2x4s with the FLEX 24V Brushless 7-1/4" Circular Saw. This lightweight and durable beast is built for advanced cutting performance and ultimate cutting capacity (up to 2-5/8"). Includes saw, 24V battery, and charger.
The FLEX 24V Lithium Battery Platform brings power output to the next level. Kit includes 24V battery and charger.
Conquer intense drilling and fastening applications with the combined power and control of FLEX SENSOR-FREE Brushless MOTOR 1/2" 2-Speed Hammer Drill Driver and 1/4" Quick Eject Hex Impact Driver. Includes both tools, two 24V batteries, and charger.
Show up to jobsite in full force with four FLEX SENSOR-FREE Brushless motor essentials. Kit includes all four tools, two 24V batteries, and charger.
The FLEX 24V Stacked Lithium Battery Platform offers industry-dominating power and performance. Starter kit a 6.0Ah Stacked Lithium battery and 280W Rapid Charger.
The FLEX 24V Brushless 5" Fixed Speed Angle Grinder with Paddle Switch delivers next-level advantages to the jobsite. Unleash up to 10,000 RPM of unmatched power but also work with confidence.
Roll everything you need to and from the jobsite with the FLEX STACK PACK™ Rolling Tool Box. Its removable telescoping handle allows for easy transport in a covered truck bed, and you can tackle any terrain with its 9-inch rugged wheels.
The FLEX 1120W 4-Port Simultaneous Rapid Charger is a multitasking powerhouse, fully charging up to four batteries at the same time at 280W per port in as little as 30 minutes.
Power through the day with the FLEX 24V 1/2” 2-Speed Compact Drill Driver, a lightweight and compact cordless drill built to conquer hard-to-reach spaces.
Power through the day with the FLEX 24V 1/2” 2-Speed Compact Drill Driver, a lightweight and compact cordless drill built to conquer hard-to-reach spaces.
The FLEX 24V 1/2” 2-Speed Compact Hammer Drill packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 24V 1/2” 2-Speed Compact Hammer Drill packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 24V 1/4” Hex Compact Impact Driver packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 1/2” Mid-Torque Impact Wrench packs big power into a compact design for a lightweight, durable tool built to conquer hard-to-reach spaces. It delivers 600 foot-pounds of fastening torque and 750 foot-pounds of nut-busting torque for demanding jobs.
The FLEX 1/2” Mid-Torque Impact Wrench packs big power into a compact design for a lightweight, durable tool built to conquer hard-to-reach spaces. It delivers 600 foot-pounds of fastening torque and 750 foot-pounds of nut-busting torque for demanding jobs.
The FLEX 1/2” Mid-Torque Impact Wrench packs big power into a compact design for a lightweight, durable tool built to conquer hard-to-reach spaces. It delivers 600 foot-pounds of fastening torque and 750 foot-pounds of nut-busting torque for demanding jobs.
Finish furniture and cabinetry or cut door and window holes from plywood and OSB with the FLEX 24V Trim Router. This 24V trim router tool features a patent-pending Spindle Stop™ shaft lock system for fast, easy bit changes and added safety by preventing accidental startups.
Finish furniture and cabinetry or cut door and window holes from plywood and OSB with the FLEX 24V Trim Router. This 24V trim router tool features an innovative Spindle Stop™ shaft lock system for fast, easy bit changes and added safety by preventing accidental startups.
Power through conduit, rod, pipes, and strut with the FLEX 24V 2-1/2” Compact Band Saw. This powerful compact band saw is 27 percent more compact and 43 percent lighter than its larger 5-inch deep cut counterpart.
Power through large PVC pipe, angle iron, and up to 4-inch black iron pipe with the FLEX 24V 5” Deep Cut Band Saw. This powerful cordless band saw features a high-power brushless motor that provides fast cutting speeds along with a lightweight magnesium housing.
From reconditioning rusted metal work to refinishing tables and chairs, the FLEX 24V 5" Random Orbital Sander delivers class-leading speed along with exceptional runtime for heavy-duty sanding applications.
Hang sheet after sheet with ease with the FLEX 24V Drywall Screw Gun. This lightweight screw gun arms you with ultimate in speed and efficiency with maximum control.
Power through the day with lightweight, compact tools built to conquer hard-to-reach spaces with the Compact Drill Driver and Compact Impact Driver Combo Kit, which includes the ½” 2-Speed Compact Drill Driver and ¼” Hex Compact Impact Driver.
The FLEX 24V 1/4” Hex Compact Impact Driver packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 24V Drywall Cut Out Tool powers through the entire day with its exceptional runtime—up to 150 outlet boxes per charge. Adjustable airflow directs the dust away from the work in the direction desired.
Hang sheet after sheet with ease with the FLEX 24V Drywall Screw Gun. This lightweight screw gun arms you with ultimate speed and efficiency with maximum control, while the Drywall Cut Out Tool powers through the day with exceptional runtime.
Punch through stud after stud with 2,400 in-lbs of torque using the FLEX 24V 2-Gear 1/2” Right Angle Drill when roughing in pipe for plumbing.
Punch through stud after stud with 1,680 inch-pounds of torque using the FLEX 24V Compact Right Angle Drill when running conduit.
The FLEX 24V Stacked Lithium battery platform offers industry-dominating power and performance. Kit includes a 3.5Ah battery and charger.
Light up your workspace with the versatile FLEX 24V Inspection Light with angled light panels optimized for lighting large areas.
Grind metals and welds in tight spaces where angle grinders can’t go with up to 28,000 RPMs using the FLEX 24V Die Grinder.
Designed for use with the FLEX 24V Trim Router (FX4221), the FLEX Plunge Base features four fixed ¼-inch steps and one adjustable depth turret for stepped and repetitive plunge cuts up to a maximum depth of 2 inches.
Hang sheet after sheet with ease with the FLEX 24V Drywall Screw Gun. This lightweight screw gun arms you with ultimate in speed and efficiency with maximum control.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 18Ga Brad Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 18Ga Brad Nailer, which drives up to 3 nails per second with zero ramp up time and 2,200 nails on a single charge with a 2.5Ah lithium-ion battery.
The FLEX 24V 3/8” Compact Impact Wrench packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 24V 3/8” Compact Impact Wrench packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 24V 1/2” Compact Impact Wrench packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
The FLEX 24V 1/2” Compact Impact Wrench packs big power into a compact size so you can power through the day with a lightweight, durable tool built to conquer hard-to-reach spaces.
Dominate long cuts and rip plywood and OSB sheets with the FLEX 24V 8-1/4” Table Saw, which delivers best-in-class rip capacity with 20.5-inch blade left clearance and 25-inch blade right clearance.
Dominate long cuts and rip plywood and OSB sheets with the FLEX 24V 8-1/4” Table Saw, which delivers best-in-class rip capacity with 20.5-inch blade left clearance and 25-inch blade right clearance.
Breeze through finishing cuts with the FLEX 24V 12” Dual Bevel Sliding Miter Saw, which makes quick and easy bevel angle adjustments with its patented FASTSHIFT™ bevel lever and features a SPINDLE STOP™ shaft lock system for fast, easy blade changes.
Breeze through finishing cuts with the FLEX 24V 12” Dual Bevel Sliding Miter Saw, which makes quick and easy bevel angle adjustments with its patented FASTSHIFT™ bevel lever and features a SPINDLE STOP™ shaft lock system for fast, easy blade changes.
Unlock all-day runtime for non-stop productivity with the FLEX 24V Power Adapter. This AC-to-DC adapter is compatible with select FLEX 24V tools including FLEX 24V Miter Saws (FX7141A) and Table Saws (FX7211, FX7221).
The FLEX 24V Lithium battery platform brings power output to the next level. Kit includes a 2.5Ah lithium battery and 160W Fast Charger.
The FLEX 24V Brushless 5" Variable Speed Angle Grinder with Paddle Switch delivers next-level advantages to the jobsite. Unleash up to 10,000 RPM of unmatched power but also work with confidence.
Power through rough construction and carpentry jobs with the FLEX 24V 10” Table Saw featuring industry-leading cut capacity as the first cordless 10-inch table saw to cut 4x4 lumber in one pass.
Power through rough construction and carpentry jobs with the FLEX 24V 10” Table Saw featuring industry-leading cut capacity as the first cordless 10-inch table saw to cut 4x4 lumber in one pass.
Rusty bolts and over-tightened lug nuts don’t stand a chance against the unrelenting power of the FLEX 24V ½” High-Torque Impact Wrench, which delivers up to 1,500 foot-pounds of maximum torque.
Rusty bolts and over-tightened lug nuts don’t stand a chance against the unrelenting power of the FLEX 24V ½” High-Torque Impact Wrench, which delivers up to 1,500 foot-pounds of maximum torque.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 15Ga Angled Finish Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 15Ga Angled Finish Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 16Ga Straight Finish Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 16Ga Straight Finish Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 16Ga Angled Finish Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 16Ga Straight Finish Nailer, which drives up to 3 nails per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 3/8” Stapler, which drives up to 3 staples per second with zero ramp up.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 3/8” Stapler, which drives up to 3 staples per second with zero ramp up.
Refill the air cylinder on your FLEX 24V Nailer or Stapler with the FLEX Nailer/Stapler Air Refill Kit, which features a ¼-inch quick-connect fitting that easily connects to standard air hoses.
Power through precise 90-degree cuts with ultimate accuracy using the FLEX Zero Clearance Insert for FLEX 8-1/4” Table Saws.
Power through precise 90-degree cuts with ultimate accuracy using the FLEX Zero Clearance Insert for FLEX 10” Table Saws.
Cut dado joints with your FLEX 8-1/4” Table Saw using the Dado Insert for FLEX 8-1/4” Table Saws, which accommodates stackable dado cutters up to ½-inch thick.
Cut dado joints with your FLEX 10” Table Saw using the Dado Insert for FLEX 10” Table Saws, which accommodates stackable dado cutters up to 13/16-inch thick.
The FLEX 24V Stacked Lithium Battery Platform offers industry-dominating power and performance. Protected by the FLEX Limited Lifetime Warranty when registered within 30 days of purchase at registermyFLEX.com through December 31, 2024.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 23Ga Pin Nailer, which drives up to 3 nails per second with zero ramp up time.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 23Ga Pin Nailer, which drives up to 3 nails per second with zero ramp up time.
Conquer fastening applications easily with the power and control of the 1/4" Quick Eject Hex Impact Driver, which delivers 2,500 in-lbs. of torque at 4,000 RPM for peak performance.
The FLEX 24V Brushless ½" 2-Speed Drill Driver with Turbo Mode dominates drilling applications with industry-leading torque (1,400 in-lbs). Durable tool construction further ensures you're equipped for the long haul.
Put torque to work with the FLEX 24V 1/2" 2-Speed Drill Driver and 1/4" Hex Impact Driver combo. These jobsite essentials pack intense power into compact and durable designs to tackle even the toughest applications.
Conquer intense drilling and fastening applications with the combined power and control of FLEX SENSOR-FREE Brushless MOTOR 1/2" 2-Speed Hammer Drill Driver and 1/4" Quick Eject Hex Impact Driver. Includes both tools, two 24V batteries, and charger.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 30° Framing Nailer, which drives up to 3 nails per second with zero ramp up time.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 30° Framing Nailer, which drives up to 3 nails per second with zero ramp up time.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 21° Framing Nailer, which drives up to 3 nails per second with zero ramp up time.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 21° Framing Nailer, which drives up to 3 nails per second with zero ramp up time.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 18Ga 1/4” Narrow Crown Stapler, which drives up to 3 staples per second with zero ramp up time.
Power through job after job without the hassle of hoses and compressors with the FLEX 24V Brushless 18Ga 1/4” Narrow Crown Stapler, which drives up to 3 staples per second with zero ramp up time.
Cut through clear coat to aggressively remove defects like rock chips, orange peel, swirl marks, and other imperfections with the FLEX 24V Rotary Polisher, which delivers unrelenting power to maintain RPMs under pressure for aggressive material removal.
Cut through clear coat to aggressively remove defects like rock chips, orange peel, swirl marks, and other imperfections with the FLEX 24V Rotary Polisher, which delivers unrelenting power to maintain RPMs under pressure for aggressive material removal.
Put the finishing touches on polishing work with the FLEX 24V Random Orbital Polisher, which delivers up to 4,350 RPM and 8,700 OPM. Ideal polisher for finishing without hologram formation.
Put the finishing touches on polishing work with the FLEX 24V Random Orbital Polisher, which delivers up to 4,350 RPM and 8,700 OPM. Ideal polisher for finishing without hologram formation.
Take on a wide range of polishing jobs from heavy-duty material removal to delicate finishing work with the FLEX 24V Gear-Driven Orbital Polisher.
Take on a wide range of polishing jobs from heavy-duty material removal to delicate finishing work with the FLEX 24V Gear-Driven Orbital Polisher.
Hit the jobsite ready to conquer the day with a power tool combo kit featuring the FLEX 24V Reciprocating Saw, Oscillating Multi-Tool, 1/2" 2-Speed Drill Driver, and ¼" Hex Impact Driver, plus (2) 2.5Ah Lithium-Ion batteries and a 160W Fast Charger.
Bridge your FLEX 18V polisher to the FLEX 24V battery platform with the FLEX 18V to 24V Adapter. Compatible with all FLEX 18V polishers, the 18V to 24V Adapter unlocks 24V compatibility to work with any FLEX 24V Lithium or Stacked Lithium battery.
Power through a day on the job with clear, powerful sound from the STACK PACK™ Radio, which features dual full-range speakers and a 5-1/4-inch subwoofer.